0531-82316906/82316905 86-531-82316900 info@znmachinery.com

Simple Analysis Proper Use of Puffed Food Machinery

Release time:2018年11月29日

How to properly use the puffed food machinery in the work to ensure the worker’s safety and the lifetime of puffed food machinery equipment. Let us explain how to correct use of the puffed food machinery:

1. When it is found that the spiral groove is clogged, do not stop immediately. Stop the feeding and then run for a while until the burnt smell is stopped. This can prevent the nozzle and the screw sleeve from being stuck. In the event that the nozzle and the screw sleeve are not removed, do not slam hardly. You can remove it from the machine body and put it in the fire for a while, then you can remove it.

2. When the nozzle is not sprayed out of the formed product at the beginning of the work, it is often caused by the temperature of the nozzle being too high. The reason is that the raw material is too dry, or there is foreign matter in the spiral groove, or the feed is interrupted. It should be found the reason according to different conditions to eliminate the fault.

3. After the end of the work to stop feeding, let the machine idle for 1 minute, drain all the material in the machine and then stop the machine.  

4. Before working, remove the working parts such as the machine head, movement, and lead screw, clean the scale and oil on the movement and the screw carefully, and dry it after washing.

5. Firstly start the machine for 1 - 2 minutes when using machine, then slowly add the raw material to the feed port when about a ring groove of the screw shaft is filled, stopped and start friction preheated. When the temperature of the machine head rises, the pressure inside the machine cavity increases, and the nozzle hole starts to spurt, the material is feed again. Since the normal temperature and pressure have not been reached in the machine cavity at this time, the amount of feed should be gradually increased gradually.

6. Feeding should be continuous and uniform, the material should be dry, otherwise it will easily cause the spiral groove to block.

Today's explanation is end, thank you for taking the time to read in your busy schedule. Buy a machine and find Arrow. Jinan Arrow is your best choice, we will provide you with the best quality and cheap products with the best enthusiasm and the best service. Please feel free to call our hotline 86-531-82316906, we are looking forward to your call.


Recommended Products
Recommended news
Online message
Please fill in the form below about your request, then our technicians or sales will contact you soon. Ensuring to deal with your request timely, please leave your telephone number!
Name:
Tel:
Address:
E -mail:
Leave a message: