How to Control the Temperature of Extruder

When using a extruder, we have various problems, and the puffing temperature of the extruder is particularly important. There are three to four temperature control tables on the main control panel of the general extruder, which show the temperature of each barrel section of the extruder, because the expansion temperature of the extruder is related to the quality and output of our products. Therefore, how to control the puffing temperature of the extruder is a concern point for everyone. Now, our prefessional technican will introduce some tips about it.

1. The temperature control table of the main control board of the extruder is only to show the temperature of each area of the extruder. The size of the pressure ring diameter of the extruder affects the expansion temperature of the extruder. If the diameter is too large, the expansion temperature will be higher, otherwise it is too smaller.

2. The size of the die hole is also related to the puffing temperature of the extruder. If the die hole is too small, the temperature will be too high.

3. The level of moisture in the raw material is inversely proportional to the puffing temperature of the extruder. If the moisture become larger, the temperature will be smaller, and the moisture become smaller,the temperature will be higher.

4. There are a huge relation between feeding system and temperature. The temperature will be lower when the feeding speed faster, and the temperature will be higher with lower feeding speed.

I believe that through the above introduction, everyone has a better understanding of how to control the puffing temperature of the extruder, and it will inevitably reduce the misunderstanding of the temperature output of the extruder, which will be very helpful for the actual production in the future.

Today's explanation is end, thank you for taking the time to read in your busy schedule. Buy a machine and find Arrow. Jinan Arrow is your best choice, we will provide you with the best quality and cheap products with the best enthusiasm and the best service. Please feel free to call our hotline 86-531-82316906, we are looking forward to your call.